|
News Release
FOR IMMEDIATE RELEASE Contact: Mike Blevins
703-525-7060 ext. 235
mblevins@gamanet.org
| Gas
Appliance
Manufacturers
Association |
|
This article was taken from
a .pdf file on GAMA's website here
GAMA Reminds Flood Victims:
Flood-Damaged Appliances Should Be Replaced, Not Repaired!
With severe flooding
in the Midwest, it is important to remember that all
flood-damaged plumbing, heating, cooling and electrical
appliances and related systems should be replaced,
rather than repaired. This warning was issued today
by GAMA, the national trade association representing
manufacturers of space heating and water heating equipment.
The association also recommended that all work on
flooded equipment be performed by qualified, licensed
contractors, not by homeowners.
The GAMA warning stems from past reports of accidents
resulting from improper do-it-yourself repairs of
flood-damaged appliances. One homeowner, for example,
suffered severe burns in a flash fire that occurred
when he tried to re-light the pilot on his flooded
gas water heater. The Association stresses that not
only gas equipment is at risk but also units using
oil or electricity as the energy source.
“Controls damaged by floodwaters are extremely
dangerous,” notes GAMA President Jack W. Klimp.
“Attempts to use equipment with defective gas
or oil control devices can result in fires, flashbacks
or explosions. And in the case of electrical appliances,
the result can be injury or even death from a powerful
electric shock.” The GAMA president noted that
devices at risk include water heaters, furnaces, boilers,
room heaters and air conditioners.
The Association stresses that the repair of flooded
appliances and related systems (including damaged
venting and electrical connections) is not a job for
the do-it-yourselfer, no matter how skilled. This
is particularly true of control valves, according
to Mr. Klimp. These components are manufactured to
extremely close tolerances. Once submerged in floodwaters,
they must be replaced. Field repairs should never
be attempted by the homeowner.
Even when controls appear to be operative, the unit
should not be used after floodwaters recede. “It
may work for a while,” Mr. Klimp explains, “but
it will deteriorate over time. It might take a week,
a month or even a year, but once any control has been
under water it presents a serious hazard…fire
or explosion in the case of gas controls, fire or
shock in the case of electric equipment.”
Because so many things can go wrong as a result of
floodwaters, it’s usually cheaper and always
safer to replace rather than repair, Mr. Klimp said.
“You can have a control valve replaced but there
may be damage to other parts of the unit, like venting,
piping, burners and insulation. There are so many
things that can go wrong that the wise choice is always
to start over with new equipment,” the GAMA
president declared.
In some instances, government aid may be available
to help consumers finance the replacement of flood-damaged
heating equipment. For information, homeowners should
contact any of the offices of the Federal Emergency
Management Agency (FEMA) set up to help flood victims.
Founded in 1935, GAMA has been an established force
in the heating industry for nearly 75 years. Headquartered
in Arlington, Virginia, GAMA is the national trade
association representing manufacturers of gas-fired,
oil-fired and electric space and water heating equipment,
components and related products used for residential,
commercial and industrial applications. GAMA member
companies account for more than 90 percent of U.S.
shipments of gas and oil-fired space heating equipment
and gas, oil and electric water heaters. Combined
U.S. shipments of GAMA member companies exceed $9
billion per year. In addition, GAMA member companies
employ more than 190,000 workers in the United States.
GAMA’s membership reaches beyond the United
States to include companies in Canada, Japan, China,
Europe and Australia.
|